Makoto Kurosaki Nakiri 165 mm

Price
$284.95
Taxes and shipping calculated at checkout
Out of stock
SPECIFICATIONS
Blade Length 165 mm
Total Length 315 mm
Steel R2 (SG2) Powdered Steel
Handle American Cherry
Ferrule Blonde Pakka
Rockwell 63-65
Height Spine to heel 52 mm
Width at Spine 2 mm
Weight 144 grams
Bevel  Double

 

Makoto Kurosaki

Makoto Kurosaki trained as a sharpener and apprenticed under Hiroshi Kato-san, as part of Takefu Knife Village, based in Echizen city, Fukui prefecture, Japan. While Makoto is Yu Kurosaki’s older brother, he has his own shop separate from Yu's, and has sharpened several different lines from knife makers such as Yoshimi Kato and Takumi Ikeda, as well as Yu Kurosaki.

The “Style-K” line knives still have a great grind and geometry to them, they are slightly more robust than Yu's knives on the spine making them slightly less delicate. The R2 (SG2) core steel is one of our favorites at the shop for its great edge retention and surprising ease of sharpening for such a tough stainless. It also has a very fine and consistent grain structure as it is a powdered steel so it will benefit from being taken to a much higher grit stone than a more traditional stainless steel will. The fit and finish on these knives is also of a very high level with a perfectly smooth transition between the handle and ferrule, the joint between the tang and handle, and the rounding and polishing on the spine and choil.

The Takefu Knife Village is a cooperative workshop in the Echizen region of Japan. It is the home to a long list of blacksmiths that we work with and many young and upcoming apprentices learning the trade. The area has a 700 year long history of smithing with roots in agricultural tools turned cutlery powerhouse. is a cooperative workshop in the Echizen region of Japan. It is the home to a long list of blacksmiths that we work with and many young and upcoming apprentices learning the trade. The area has a 700 year long history of smithing with roots in agricultural tools turned cutlery powerhouse. 


The Knife

The Nakiri is designed to be a vegetable chopper. It's flat blade profile means that the majority of the edge contacts the cutting board when using an up and down chopping motion which helps prevent those pesky vegetable accordions which occur when the edge doesn't cut all the way through. The tall blade provides ample travel for the guide handle further adding to the comfort this knife provides when using a chopping motion.  

Knife Care (Stainless Steel)

  • Although this knife is made from stainless steel we do still encourage our customers to keep their knives as dry and clean as possible.
  • NO DISHWASHER - the high heat will ruin the wooden handle.
  • Wash and dry by hand using regular dish soap and warm water using a none abrasive sponge or cloth.
  • Ensure the knife is dry before being put away for storage and ensure the edge of the knife is protected to avoid any unnecessary dulling.
  • Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
CARE INSTRUCTIONS

Follow these care recommendations for your Japanese knives to protect the edge and keep them sharp as long as possible: 

  • Do not put them in the dishwasher or soak them in water, as this may ruin the wooden handle and rust the blade. 
  • Wash with soapy water and wipe dry after each use, especially after handling acidic ingredients, to minimize the risk of rusting.  
  • Don’t cut through anything you wouldn’t bite through, like frozen foods, hard candies, or bones, as this may chip or damage the knife. 
  • Don't torque the blade, as this may chip the knife. Use it in a forward and back, up and down motion without twisting.
  • Don’t scrape the cutting board with your knife, as this will cause it to dull quickly and ruin your edge. 
  • Use an end grain wooden cutting board or hi-soft rubberized cutting board if you can to protect your edge. Glass, bamboo, and granite are terrible materials for cutting boards, and plastic is only slightly better. 
SHIPPING & RETURNS

All products are shipped within 24 hours. We offer same day shipping for products ordered by 12pm. Please allow 4-7 business days for your shipment to arrive with standard shipping. Expedited shipping options are also available at checkout.

We offer free shipping on orders over $150 CAD / $120 USD in the US and Canada.

Curbside pick-up is available at both our Hamilton and Etobicoke locations.

To make sure our customers are always satisfied, we offer full refunds on products for 14 days after receiving them. See our full return policy for details.

More questions? Check out our shipping policy, our return policy, or reach out to us directly.

KNIFE SHAPE

STEEL TYPE

R2 (SG2)

R2 and SG2 are technically different steel types, but are so similar we and many other retailers lump them into the same category. They are what’s known as a “quick powdered” stainless tool steel with incredible edge retention and corrosion resistance. Their one drawback is that their hardness can make them difficult to sharpen. It is not a steel we would recommend for those planning to thin and polish the bevels of their knives unless they are equipped with the proper tools (you will need a low grit stone in the #200 grit range).

Chemical Composition:
C 1.25-1.45% | Cr 14.0-16.0% | Mo 2.3-3.3% | V 1.8-2.2%

COMPOSITION

THE BLACKSMITH

RECENTLY VIEWED

RECOMMENDED FOR YOU

REVIEWS